{
  "schema": "FluentAGI-reproduction-v1",
  "run_id": "20261018-000431-40ac88",
  "request": "查找一些资料，帮我做一个流体二维经典案例，要求成几秒动画，比如扇叶搅动，局部加密",
  "rounds": [
    {
      "round": "round-01",
      "prompt": "You are FluentAGI for Ansys Fluent. Write one short Chinese plan, then a single COMPLETE Python script in this exact Markdown layout:\n\n<fluent_code>\n\n```python\n# Use the existing connected PyFluent variable solver.\n# Continue with the complete executable script here.\n```\n\n</fluent_code>\n\nPut a newline before and after each tag and each fence. Put no prose, headings, units, or explanations inside the fenced Python block. Do not place ```python and Python statements on the same line. Keep the script under 280 lines. Use loops instead of repeating similar statements. Never truncate a string, parenthesis, or code fence; always close </fluent_code>.\nUse the existing solver session and compatible PyFluent APIs. Do not launch or close Fluent. Do not use Abaqus APIs. Use solver.settings APIs and the provided fluentagi adapters. Direct solver.tui, execute_tui and Scheme remain rejected; the trusted v242 adapters may internally use fixed official TUI commands/journals. For mesh display use solver.settings.results.graphics.mesh and graphics.views APIs. Do not return JSON tool plans. Do not invent mesh files or API names. Only operate on the requested case and task directory. Preserve existing results. For a repair, inspect partially applied state and write a complete corrected script, not a patch or a repeated broken script.\nThe web AI cannot read or modify host application source. Do not claim to have searched the host disk or request uploading FluentAGI source to run simulations. Use the verified runtime adapters. Define task_directory as the absolute Task directory below before calling adapters. For VOF surface tension use fluentagi.configure_surface_tension(directory=task_directory,coefficient=0.072,phase_a=\"phase-1\",phase_b=\"phase-2\"); coefficient is N/m, replace the example with the requested value. This v242 adapter preserves other phase pairs, enables the surface-tension model and reads back every coefficient. inspect_surface_tension(directory=task_directory) returns verified state. Do not ask the user to edit the plugin or click GUI dialogs for this supported operation.\nFor three-phase boiling setup in Fluent 2024 R2, use fluentagi.configure_three_phase_materials(directory=task_directory, materials=[\"air\", \"water-liquid\", \"water-vapor\"]) to create actual phase-1/2/3 domains and verify material assignments. For an existing three-phase model, fluentagi.assign_multiphase_materials(materials=[...], directory=task_directory) assigns materials without changing the phase count. Then call fluentagi.configure_evaporation_condensation(directory=task_directory, saturation_temperature=T_sat_K, evaporation_frequency=from_frequency_per_second, condensation_frequency=to_frequency_per_second, from_phase=\"phase-2\", to_phase=\"phase-3\"). Pass the user's specified temperature/frequencies; preserve their geometry, heating and calculation parameters. This verified v242 VOF Lee adapter enables energy, uses a fixed official TUI journal and verifies the phase pair, constant saturation temperature, both frequencies and Lee model by an independent case snapshot. It does not initialize or advance the simulation. Do not say this feature is unavailable because direct TUI is forbidden; use the adapter. fluentagi.inspect_phase_change(directory=task_directory) returns actual phases and mass transfer settings, refreshing a unique case snapshot. Do not replace existing unrelated mechanisms. This adapter supports one Lee mass transfer pair, not Eulerian wall boiling, semi-mechanistic wall boiling, pressure-dependent saturation tables or UDFs. Do not claim a complete validated boiling simulation from successful setup alone. initialize_air is a TWO-PHASE adapter; do not use it for three-phase cases. Use verified settings initialization and phase-aware patching only for requested new calculations.\nThe runtime provides fluentagi.assign_phase_materials(primary=\"air\", secondary=\"water-liquid\", directory=task_directory), fluentagi.inspect_phases(), and fluentagi.export_results(directory=task_directory, fields=[\"pressure\", \"velocity-magnitude\"]). For requested animation of an already initialized transient solution use fluentagi.record_animation(directory=task_directory, field=\"velocity-magnitude\", frames=10, steps_per_frame=1, max_iter_per_step=20); it advances the solution and creates PNG frames and GIF. Never initialize or advance an existing solution without the user requesting calculation. These are executable verified adapters, not prose instructions. Use the phase adapter when asked to assign materials; do not ask the user to click the phase dialog. Print returned results. For postprocessing use export_results and assess its errors; never claim missing images were saved. Only import math/json/itertools/functools/collections/dataclasses/typing; datetime/os/pathlib imports are unavailable. Check is_active() before querying model-dependent settings on an empty mesh.\nFor NEW planar geometry and meshing use mesh = fluentagi.build_planar(directory=task_directory, points=[[x,y],...], inlet_edges=[0], outlet_edges=[2], size=0.001). Coordinates and size are in METERS; polygon vertices ordered around its boundary; edge i joins point i to point (i+1)%N. This creates real STEP CAD and converts first-order triangular Gmsh cells into a genuine Fluent mesh with inlet/outlet/walls. Then solver.settings.file.read_mesh(file_name=mesh[\"mesh_file\"]), solver.settings.mesh.check(), configure physics, initialize, iterate, and export_results. Save current case/data before replacing loaded geometry. Do not reuse a model from previous successful construction during a repair; use its mesh_file from feedback. For curved planar CAD, use fluentagi.geometry_mesh(directory=task_directory,code=gmsh_script_string); the worker has gmsh,math,output_dir already, no imports; create OCC geometry and physical line groups named inlet,outlet,walls, export STEP, generate first-order triangular or quadrilateral mesh(2). Returned mesh_file is Fluent format; gmsh-native.msh is NOT Fluent format. 3D modeling and volume mesh conversion are now implemented. fluentagi.build_volume(directory=task_directory, shape=\"box\",length=0.1,width=0.02,height=0.02,size=0.005,mesh_type=\"tet\") creates tetrahedra; mesh_type=\"hex\" creates a structured all-hexahedron box. shape=\"cylinder\",radius=0.01 supports tetrahedra with axis along +X. Inlet is X=0 and outlet X=length. fluentagi.build_extruded(directory=task_directory,points=[[x,y],...],inlet_edges=[0],outlet_edges=[2],depth=0.01,size=0.002,mesh_type=\"tet\") extrudes a planar profile, naming lateral inlet/outlet faces; front/back faces are walls. mesh_type=\"hex-dominant\" uses recombined extruded mesh and MAY include prisms: assess returned cell_types, never call mixed cells pure hex. geometry_mesh supports arbitrary OCC volumes (boolean unions/cuts), physical SURFACE groups inlet/outlet/walls, and mesh.generate(3), first-order tet/hex/prism/pyramid. Imported STEP is not currently supported by the restricted worker. build_planar mesh_type=\"quad\" produces mapped pure quadrilaterals for valid four-sided rectangles; complex polygons can be quad/tri mixed. 2D uses triangles/quads, 3D uses tet/hex. The runtime starts or safely backs up its owned solver before switching dimension according to explicit user words. Do not request user-supplied 3D mesh for supported geometry. Save backups before replacing any loaded mesh. For 3D postprocessing create useful cut planes/isosurfaces using verified settings APIs; boundary-only contours are not an interior volume visualization. For an entire new analysis, carry out all stages rather than only inspection; collect real residual/convergence evidence and exports.\nFor water-air transient filling, call fluentagi.configure_water_air(directory=task_directory,velocity=0.05,time_step=0.001,gravity_y=-9.81,inlet=\"inlet\",outlet=\"outlet\"). This backs up and sets laminar VOF, materials, phase-aware inlet/outlet, gravity and timestep; does NOT initialize or erase existing solution. For requested NEW filling use fluentagi.initialize_air(directory=task_directory), which saves a backup, hybrid initializes and patches phase-2 volume fraction to zero across all fluid cell zones. Never initialize_air on existing results without an explicit restart request. Fluent v242 contour fields are phase-2-vof (water, only after confirming phase-2=water-liquid) and phase-1-vof (air); do not confuse them. Query real contour field.allowed_values for VOF fields. For 3D interior contours/animation use section=fluentagi.create_section(axis=\"z\",position=depth/2), then export_results(...,surfaces=[section[\"surface\"]]) or record_animation(...,surfaces=[section[\"surface\"]]). A plane section is not full volumetric rendering; report it accurately. Frames are 2..60. Each frame after the first advances steps_per_frame real time steps; final time is initial time+(frames-1)*steps_per_frame*time_step. Do not claim the pipe fills if the simulated duration is too short. Normalize typos like \"二维四面体\" by explaining 2D triangular equivalent; if depth/3D was explicitly requested, use volume tools.\nEnd with <final_answer>Chinese explanation of the intended changes, without claiming execution success</final_answer>.\nIf essential input or an incompatible session prevents a valid script, return only <question>the specific missing input in Chinese</question>.\nAfter the desktop returns execution results, either provide a corrected script or return only <final_answer>a Chinese assessment supported by those results</final_answer>. Do not execute the same successful script again. Successful execution alone does not prove convergence.\n\nRuntime capabilities:\n{\"protocol\": \"FluentAGI-capabilities-v1\", \"session\": {\"connected\": true, \"mode\": \"launch\"}, \"geometry\": {\"worker\": \"gmsh isolated process\", \"imports\": [], \"builtins\": [\"range\", \"len\", \"int\", \"float\", \"str\", \"list\", \"tuple\", \"enumerate\", \"zip\", \"min\", \"max\", \"abs\", \"round\", \"RuntimeError\", \"ValueError\", \"print\", \"set\", \"sum\", \"sorted\", \"bool\", \"all\", \"any\"], \"physical_groups\": [\"inlet\", \"outlet\", \"walls\"], \"cell_types\": [\"triangle\", \"quadrilateral\", \"tetrahedron\", \"hexahedron\", \"prism\", \"pyramid\"]}, \"script\": {\"imports\": [\"math\", \"json\", \"itertools\", \"functools\", \"collections\", \"dataclasses\", \"typing\"], \"adapters\": [\"build_planar\", \"build_volume\", \"build_extruded\", \"geometry_mesh\", \"configure_water_air\", \"initialize_air\", \"record_animation\", \"export_results\", \"assign_phase_materials\", \"assign_multiphase_materials\", \"configure_three_phase_materials\", \"configure_evaporation_condensation\", \"inspect_phase_change\", \"configure_surface_tension\", \"inspect_surface_tension\"]}, \"generated_at\": 1792253089.358974, \"phase_change\": {\"version\": \"v242\", \"model\": \"VOF Lee\", \"phases\": [2, 3], \"saturation\": \"constant K\", \"frequencies\": \"positive finite 1/s\", \"mass_transfer_pairs\": 1, \"internal_official_tui\": true, \"generated_direct_tui\": false, \"readback\": \"unique case snapshot\", \"initializes\": false}, \"surface_tension\": {\"version\": \"v242\", \"model\": \"VOF\", \"coefficient\": \"nonnegative finite N/m\", \"preserves_other_pairs\": true, \"readback\": \"unique case snapshot\", \"initializes\": false}, \"fluent_version\": \"Ansys Fluent 2024 R2\", \"model_active\": false}\nCurrent session:\n{\"connected\": true, \"dimension\": 2, \"mode\": \"solver\", \"owned\": true}\nTask directory:\nC:\\Users\\13977\\AppData\\Local\\FluentAGI\\data\\runs\\20261018-000431-40ac88\nCurrent request:\n查找一些资料，帮我做一个流体二维经典案例，要求成几秒动画，比如扇叶搅动，局部加密",
      "reply": "ChatGPT 说：\n\n采用经典二维圆柱绕流：参考 DFG 案例，制作均匀入口、Re＝100 的教学变体，自动建模、圆柱及尾流局部加密，计算并导出覆盖 6 秒物理过程的动画。\nFeatflow\n\n<fluent_code>\n```python\n# Use the existing connected PyFluent variable solver.\ntask_directory = r\"C:\\Users\\13977\\AppData\\Local\\FluentAGI\\data\\runs\\20261018-000431-40ac88\"\nprefix = task_directory + \"/cylinder_re100_a9e438cc\"\nsettings = solver.settings\n\nif settings.setup.models.is_active():\n    settings.file.write_case_data(file_name=prefix + \"_previous.cas.h5\")\n\ngmsh_code = \"\"\"\ngmsh.model.add(\"cylinder_re100\")\nocc = gmsh.model.occ\nrectangle = occ.addRectangle(0, 0, 0, 2.2, 0.41)\ndisk = occ.addDisk(0.2, 0.2, 0, 0.05, 0.05)\nfluid, mapping = occ.cut([(2, rectangle)], [(2, disk)])\nocc.synchronize()\nsurfaces = [tag for dim, tag in fluid if dim == 2]\nif len(surfaces) != 1:\n    raise RuntimeError(\"Expected one connected fluid surface\")\nboundary = gmsh.model.getBoundary(fluid, oriented=False)\ngroups = {\"inlet\": [], \"outlet\": [], \"walls\": []}\ncylinder = []\nfor dim, tag in boundary:\n    x, y, z = occ.getCenterOfMass(dim, tag)\n    if abs(x) < 1e-7:\n        groups[\"inlet\"].append(tag)\n    elif abs(x - 2.2) < 1e-7:\n        groups[\"outlet\"].append(tag)\n    else:\n        groups[\"walls\"].append(tag)\n        if abs(x - 0.2) < 0.06 and abs(y - 0.2) < 0.06:\n            cylinder.append(tag)\nif not cylinder:\n    raise RuntimeError(\"Cylinder boundary identification failed\")\nfor name, tags in groups.items():\n    if not tags:\n        raise RuntimeError(\"Missing boundary: \" + name)\n    group = gmsh.model.addPhysicalGroup(1, tags)\n    gmsh.model.setPhysicalName(1, group, name)\ngroup = gmsh.model.addPhysicalGroup(2, surfaces)\ngmsh.model.setPhysicalName(2, group, \"fluid\")\nfield = gmsh.model.mesh.field\ndistance = field.add(\"Distance\")\nfield.setNumbers(distance, \"CurvesList\", cylinder)\nfield.setNumber(distance, \"Sampling\", 120)\nnear = field.add(\"Threshold\")\nfor key, value in [\n    (\"InField\", distance), (\"SizeMin\", 0.004),\n    (\"SizeMax\", 0.03), (\"DistMin\", 0.015), (\"DistMax\", 0.15)\n]:\n    field.setNumber(near, key, value)\nwake = field.add(\"Box\")\nfor key, value in [\n    (\"VIn\", 0.012), (\"VOut\", 0.03),\n    (\"XMin\", 0.2), (\"XMax\", 1.9),\n    (\"YMin\", 0.09), (\"YMax\", 0.31),\n    (\"ZMin\", -0.01), (\"ZMax\", 0.01), (\"Thickness\", 0.04)\n]:\n    field.setNumber(wake, key, value)\nminimum = field.add(\"Min\")\nfield.setNumbers(minimum, \"FieldsList\", [near, wake])\nfield.setAsBackgroundMesh(minimum)\nfor key, value in [\n    (\"Mesh.MeshSizeExtendFromBoundary\", 0),\n    (\"Mesh.MeshSizeFromPoints\", 0),\n    (\"Mesh.MeshSizeFromCurvature\", 0),\n    (\"Mesh.ElementOrder\", 1),\n    (\"Mesh.Algorithm\", 6)\n]:\n    gmsh.option.setNumber(key, value)\ngmsh.write(output_dir + \"/cylinder.step\")\ngmsh.model.mesh.generate(2)\ngmsh.model.mesh.optimize(\"Relocate2D\")\ngmsh.write(output_dir + \"/gmsh-native.msh\")\n\"\"\"\nmesh = fluentagi.geometry_mesh(\n    directory=task_directory,\n    code=gmsh_code\n)\nprint(mesh)\nif not isinstance(mesh, dict) or not mesh.get(\"mesh_file\"):\n    raise RuntimeError(\"No verified Fluent mesh returned\")\n\nsettings.file.read_mesh(file_name=mesh[\"mesh_file\"])\nsettings.mesh.check()\nif not settings.setup.models.is_active():\n    raise RuntimeError(\"Physics settings are inactive after reading mesh\")\n\nsetup = settings.setup\nsetup.general.solver.type = \"pressure-based\"\ntime_options = setup.general.solver.time.allowed_values()\nif \"unsteady-2nd-order\" in time_options:\n    setup.general.solver.time = \"unsteady-2nd-order\"\nelif \"unsteady-1st-order\" in time_options:\n    setup.general.solver.time = \"unsteady-1st-order\"\nelse:\n    print(time_options)\n    raise RuntimeError(\"No supported transient solver option\")\n\nsetup.models.viscous.model = \"laminar\"\nsetup.models.energy.enabled = False\nsetup.general.operating_conditions.gravity.enable = False\n\nfluids = setup.materials.fluid\nif \"air\" not in fluids.get_object_names():\n    raise RuntimeError(\"Default air material is absent\")\nmaterial = fluids[\"air\"]\nmaterial.density.set_state({\"option\": \"constant\", \"value\": 1.0})\nmaterial.viscosity.set_state({\"option\": \"constant\", \"value\": 0.001})\n\nzones = setup.cell_zone_conditions.fluid\nzone_names = zones.get_object_names()\nif not zone_names:\n    raise RuntimeError(\"No fluid cell zone\")\nfor name in zone_names:\n    zones[name].material = \"air\"\n\nboundaries = setup.boundary_conditions\nif \"inlet\" not in boundaries.velocity_inlet.get_object_names():\n    raise RuntimeError(\"Expected velocity inlet named inlet\")\nif \"outlet\" not in boundaries.pressure_outlet.get_object_names():\n    raise RuntimeError(\"Expected pressure outlet named outlet\")\n\nmomentum = boundaries.velocity_inlet[\"inlet\"].momentum\nmomentum_state = momentum.get_state()\nif \"velocity\" in momentum_state:\n    momentum.velocity = 1.0\nelif \"velocity_magnitude\" in momentum_state:\n    momentum.velocity_magnitude = 1.0\nelse:\n    print(momentum_state)\n    raise RuntimeError(\"No verified inlet velocity setting\")\nboundaries.pressure_outlet[\"outlet\"].momentum.gauge_pressure = 0.0\n\nprint({\"material\": material.get_state()})\nprint({\"inlet\": boundaries.velocity_inlet[\"inlet\"].get_state()})\nprint({\"outlet\": boundaries.pressure_outlet[\"outlet\"].get_state()})\nprint({\"walls\": boundaries.wall.get_state()})\nprint({\"Re\": 100.0, \"diameter\": 0.1, \"inlet_velocity\": 1.0})\n\ncalculation = settings.solution.run_calculation\ncalculation.transient_controls.time_step_size = 0.005\nprint({\"transient_controls\": calculation.transient_controls.get_state()})\n\nsettings.file.write_case(file_name=prefix + \"_setup.cas.h5\")\nsettings.solution.initialization.hybrid_initialize()\nsettings.file.write_case_data(file_name=prefix + \"_initial.cas.h5\")\n\nprint({\"residual_monitor_settings\": settings.solution.monitor.residual.get_state()})\nprint({\n    \"frames\": 41,\n    \"steps_per_frame\": 30,\n    \"time_step\": 0.005,\n    \"physical_duration\": 6.0,\n    \"maximum_iterations_per_step\": 20\n})\n\ntry:\n    animation = fluentagi.record_animation(\n        directory=task_directory,\n        field=\"velocity-magnitude\",\n        frames=41,\n        steps_per_frame=30,\n        max_iter_per_step=20\n    )\n    print({\"animation\": animation})\nfinally:\n    settings.file.write_case_data(file_name=prefix + \"_checkpoint.cas.h5\")\n\nexports = fluentagi.export_results(\n    directory=task_directory,\n    fields=[\"pressure\", \"velocity-magnitude\"]\n)\nprint({\"exports\": exports})\n\nfor name, result in [(\"animation\", animation), (\"exports\", exports)]:\n    if isinstance(result, dict):\n        errors = result.get(\"errors\") or result.get(\"error\")\n        failed = result.get(\"success\") is False or result.get(\"ok\") is False\n        if errors or failed:\n            print({\"failed_stage\": name, \"details\": result})\n            raise RuntimeError(\"Inspect returned adapter errors: \" + name)\n\nprint({\"residual_monitor_final\": settings.solution.monitor.residual.get_state()})\nprint(\"Review actual residual histories and time-step completion in solver output.\")\nprint(\"Successful execution does not establish convergence or mesh independence.\")\n```\n</fluent_code>\n\n<final_answer>此脚本拟生成圆柱绕流局部加密网格，并计算、导出 41 帧速度动画及压力云图，保存模型和计算数据。采用均匀入口，因此属于经典案例的教学变体；实际动画、涡脱落及收敛情况须根据执行反馈检查，6 秒物理时长不代表计算只需 6 秒。</final_answer>",
      "executed_script": "# Use the existing connected PyFluent variable solver.\ntask_directory = r\"C:\\Users\\13977\\AppData\\Local\\FluentAGI\\data\\runs\\20261018-000431-40ac88\"\nprefix = task_directory + \"/cylinder_re100_a9e438cc\"\nsettings = solver.settings\n\nif settings.setup.models.is_active():\n    settings.file.write_case_data(file_name=prefix + \"_previous.cas.h5\")\n\ngmsh_code = \"\"\"\ngmsh.model.add(\"cylinder_re100\")\nocc = gmsh.model.occ\nrectangle = occ.addRectangle(0, 0, 0, 2.2, 0.41)\ndisk = occ.addDisk(0.2, 0.2, 0, 0.05, 0.05)\nfluid, mapping = occ.cut([(2, rectangle)], [(2, disk)])\nocc.synchronize()\nsurfaces = [tag for dim, tag in fluid if dim == 2]\nif len(surfaces) != 1:\n    raise RuntimeError(\"Expected one connected fluid surface\")\nboundary = gmsh.model.getBoundary(fluid, oriented=False)\ngroups = {\"inlet\": [], \"outlet\": [], \"walls\": []}\ncylinder = []\nfor dim, tag in boundary:\n    x, y, z = occ.getCenterOfMass(dim, tag)\n    if abs(x) < 1e-7:\n        groups[\"inlet\"].append(tag)\n    elif abs(x - 2.2) < 1e-7:\n        groups[\"outlet\"].append(tag)\n    else:\n        groups[\"walls\"].append(tag)\n        if abs(x - 0.2) < 0.06 and abs(y - 0.2) < 0.06:\n            cylinder.append(tag)\nif not cylinder:\n    raise RuntimeError(\"Cylinder boundary identification failed\")\nfor name, tags in groups.items():\n    if not tags:\n        raise RuntimeError(\"Missing boundary: \" + name)\n    group = gmsh.model.addPhysicalGroup(1, tags)\n    gmsh.model.setPhysicalName(1, group, name)\ngroup = gmsh.model.addPhysicalGroup(2, surfaces)\ngmsh.model.setPhysicalName(2, group, \"fluid\")\nfield = gmsh.model.mesh.field\ndistance = field.add(\"Distance\")\nfield.setNumbers(distance, \"CurvesList\", cylinder)\nfield.setNumber(distance, \"Sampling\", 120)\nnear = field.add(\"Threshold\")\nfor key, value in [\n    (\"InField\", distance), (\"SizeMin\", 0.004),\n    (\"SizeMax\", 0.03), (\"DistMin\", 0.015), (\"DistMax\", 0.15)\n]:\n    field.setNumber(near, key, value)\nwake = field.add(\"Box\")\nfor key, value in [\n    (\"VIn\", 0.012), (\"VOut\", 0.03),\n    (\"XMin\", 0.2), (\"XMax\", 1.9),\n    (\"YMin\", 0.09), (\"YMax\", 0.31),\n    (\"ZMin\", -0.01), (\"ZMax\", 0.01), (\"Thickness\", 0.04)\n]:\n    field.setNumber(wake, key, value)\nminimum = field.add(\"Min\")\nfield.setNumbers(minimum, \"FieldsList\", [near, wake])\nfield.setAsBackgroundMesh(minimum)\nfor key, value in [\n    (\"Mesh.MeshSizeExtendFromBoundary\", 0),\n    (\"Mesh.MeshSizeFromPoints\", 0),\n    (\"Mesh.MeshSizeFromCurvature\", 0),\n    (\"Mesh.ElementOrder\", 1),\n    (\"Mesh.Algorithm\", 6)\n]:\n    gmsh.option.setNumber(key, value)\ngmsh.write(output_dir + \"/cylinder.step\")\ngmsh.model.mesh.generate(2)\ngmsh.model.mesh.optimize(\"Relocate2D\")\ngmsh.write(output_dir + \"/gmsh-native.msh\")\n\"\"\"\nmesh = fluentagi.geometry_mesh(\n    directory=task_directory,\n    code=gmsh_code\n)\nprint(mesh)\nif not isinstance(mesh, dict) or not mesh.get(\"mesh_file\"):\n    raise RuntimeError(\"No verified Fluent mesh returned\")\n\nsettings.file.read_mesh(file_name=mesh[\"mesh_file\"])\nsettings.mesh.check()\nif not settings.setup.models.is_active():\n    raise RuntimeError(\"Physics settings are inactive after reading mesh\")\n\nsetup = settings.setup\nsetup.general.solver.type = \"pressure-based\"\ntime_options = setup.general.solver.time.allowed_values()\nif \"unsteady-2nd-order\" in time_options:\n    setup.general.solver.time = \"unsteady-2nd-order\"\nelif \"unsteady-1st-order\" in time_options:\n    setup.general.solver.time = \"unsteady-1st-order\"\nelse:\n    print(time_options)\n    raise RuntimeError(\"No supported transient solver option\")\n\nsetup.models.viscous.model = \"laminar\"\nsetup.models.energy.enabled = False\nsetup.general.operating_conditions.gravity.enable = False\n\nfluids = setup.materials.fluid\nif \"air\" not in fluids.get_object_names():\n    raise RuntimeError(\"Default air material is absent\")\nmaterial = fluids[\"air\"]\nmaterial.density.set_state({\"option\": \"constant\", \"value\": 1.0})\nmaterial.viscosity.set_state({\"option\": \"constant\", \"value\": 0.001})\n\nzones = setup.cell_zone_conditions.fluid\nzone_names = zones.get_object_names()\nif not zone_names:\n    raise RuntimeError(\"No fluid cell zone\")\nfor name in zone_names:\n    zones[name].material = \"air\"\n\nboundaries = setup.boundary_conditions\nif \"inlet\" not in boundaries.velocity_inlet.get_object_names():\n    raise RuntimeError(\"Expected velocity inlet named inlet\")\nif \"outlet\" not in boundaries.pressure_outlet.get_object_names():\n    raise RuntimeError(\"Expected pressure outlet named outlet\")\n\nmomentum = boundaries.velocity_inlet[\"inlet\"].momentum\nmomentum_state = momentum.get_state()\nif \"velocity\" in momentum_state:\n    momentum.velocity = 1.0\nelif \"velocity_magnitude\" in momentum_state:\n    momentum.velocity_magnitude = 1.0\nelse:\n    print(momentum_state)\n    raise RuntimeError(\"No verified inlet velocity setting\")\nboundaries.pressure_outlet[\"outlet\"].momentum.gauge_pressure = 0.0\n\nprint({\"material\": material.get_state()})\nprint({\"inlet\": boundaries.velocity_inlet[\"inlet\"].get_state()})\nprint({\"outlet\": boundaries.pressure_outlet[\"outlet\"].get_state()})\nprint({\"walls\": boundaries.wall.get_state()})\nprint({\"Re\": 100.0, \"diameter\": 0.1, \"inlet_velocity\": 1.0})\n\ncalculation = settings.solution.run_calculation\ncalculation.transient_controls.time_step_size = 0.005\nprint({\"transient_controls\": calculation.transient_controls.get_state()})\n\nsettings.file.write_case(file_name=prefix + \"_setup.cas.h5\")\nsettings.solution.initialization.hybrid_initialize()\nsettings.file.write_case_data(file_name=prefix + \"_initial.cas.h5\")\n\nprint({\"residual_monitor_settings\": settings.solution.monitor.residual.get_state()})\nprint({\n    \"frames\": 41,\n    \"steps_per_frame\": 30,\n    \"time_step\": 0.005,\n    \"physical_duration\": 6.0,\n    \"maximum_iterations_per_step\": 20\n})\n\ntry:\n    animation = fluentagi.record_animation(\n        directory=task_directory,\n        field=\"velocity-magnitude\",\n        frames=41,\n        steps_per_frame=30,\n        max_iter_per_step=20\n    )\n    print({\"animation\": animation})\nfinally:\n    settings.file.write_case_data(file_name=prefix + \"_checkpoint.cas.h5\")\n\nexports = fluentagi.export_results(\n    directory=task_directory,\n    fields=[\"pressure\", \"velocity-magnitude\"]\n)\nprint({\"exports\": exports})\n\nfor name, result in [(\"animation\", animation), (\"exports\", exports)]:\n    if isinstance(result, dict):\n        errors = result.get(\"errors\") or result.get(\"error\")\n        failed = result.get(\"success\") is False or result.get(\"ok\") is False\n        if errors or failed:\n            print({\"failed_stage\": name, \"details\": result})\n            raise RuntimeError(\"Inspect returned adapter errors: \" + name)\n\nprint({\"residual_monitor_final\": settings.solution.monitor.residual.get_state()})\nprint(\"Review actual residual histories and time-step completion in solver output.\")\nprint(\"Successful execution does not establish convergence or mesh independence.\")"
    },
    {
      "round": "round-02",
      "prompt": "You are FluentAGI for Ansys Fluent. Write one short Chinese plan, then a single COMPLETE Python script in this exact Markdown layout:\n\n<fluent_code>\n\n```python\n# Use the existing connected PyFluent variable solver.\n# Continue with the complete executable script here.\n```\n\n</fluent_code>\n\nPut a newline before and after each tag and each fence. Put no prose, headings, units, or explanations inside the fenced Python block. Do not place ```python and Python statements on the same line. Keep the script under 280 lines. Use loops instead of repeating similar statements. Never truncate a string, parenthesis, or code fence; always close </fluent_code>.\nUse the existing solver session and compatible PyFluent APIs. Do not launch or close Fluent. Do not use Abaqus APIs. Use solver.settings APIs and the provided fluentagi adapters. Direct solver.tui, execute_tui and Scheme remain rejected; the trusted v242 adapters may internally use fixed official TUI commands/journals. For mesh display use solver.settings.results.graphics.mesh and graphics.views APIs. Do not return JSON tool plans. Do not invent mesh files or API names. Only operate on the requested case and task directory. Preserve existing results. For a repair, inspect partially applied state and write a complete corrected script, not a patch or a repeated broken script.\nThe web AI cannot read or modify host application source. Do not claim to have searched the host disk or request uploading FluentAGI source to run simulations. Use the verified runtime adapters. Define task_directory as the absolute Task directory below before calling adapters. For VOF surface tension use fluentagi.configure_surface_tension(directory=task_directory,coefficient=0.072,phase_a=\"phase-1\",phase_b=\"phase-2\"); coefficient is N/m, replace the example with the requested value. This v242 adapter preserves other phase pairs, enables the surface-tension model and reads back every coefficient. inspect_surface_tension(directory=task_directory) returns verified state. Do not ask the user to edit the plugin or click GUI dialogs for this supported operation.\nFor three-phase boiling setup in Fluent 2024 R2, use fluentagi.configure_three_phase_materials(directory=task_directory, materials=[\"air\", \"water-liquid\", \"water-vapor\"]) to create actual phase-1/2/3 domains and verify material assignments. For an existing three-phase model, fluentagi.assign_multiphase_materials(materials=[...], directory=task_directory) assigns materials without changing the phase count. Then call fluentagi.configure_evaporation_condensation(directory=task_directory, saturation_temperature=T_sat_K, evaporation_frequency=from_frequency_per_second, condensation_frequency=to_frequency_per_second, from_phase=\"phase-2\", to_phase=\"phase-3\"). Pass the user's specified temperature/frequencies; preserve their geometry, heating and calculation parameters. This verified v242 VOF Lee adapter enables energy, uses a fixed official TUI journal and verifies the phase pair, constant saturation temperature, both frequencies and Lee model by an independent case snapshot. It does not initialize or advance the simulation. Do not say this feature is unavailable because direct TUI is forbidden; use the adapter. fluentagi.inspect_phase_change(directory=task_directory) returns actual phases and mass transfer settings, refreshing a unique case snapshot. Do not replace existing unrelated mechanisms. This adapter supports one Lee mass transfer pair, not Eulerian wall boiling, semi-mechanistic wall boiling, pressure-dependent saturation tables or UDFs. Do not claim a complete validated boiling simulation from successful setup alone. initialize_air is a TWO-PHASE adapter; do not use it for three-phase cases. Use verified settings initialization and phase-aware patching only for requested new calculations.\nThe runtime provides fluentagi.assign_phase_materials(primary=\"air\", secondary=\"water-liquid\", directory=task_directory), fluentagi.inspect_phases(), and fluentagi.export_results(directory=task_directory, fields=[\"pressure\", \"velocity-magnitude\"]). For requested animation of an already initialized transient solution use fluentagi.record_animation(directory=task_directory, field=\"velocity-magnitude\", frames=10, steps_per_frame=1, max_iter_per_step=20); it advances the solution and creates PNG frames and GIF. Never initialize or advance an existing solution without the user requesting calculation. These are executable verified adapters, not prose instructions. Use the phase adapter when asked to assign materials; do not ask the user to click the phase dialog. Print returned results. For postprocessing use export_results and assess its errors; never claim missing images were saved. Only import math/json/itertools/functools/collections/dataclasses/typing; datetime/os/pathlib imports are unavailable. Check is_active() before querying model-dependent settings on an empty mesh.\nFor NEW planar geometry and meshing use mesh = fluentagi.build_planar(directory=task_directory, points=[[x,y],...], inlet_edges=[0], outlet_edges=[2], size=0.001). Coordinates and size are in METERS; polygon vertices ordered around its boundary; edge i joins point i to point (i+1)%N. This creates real STEP CAD and converts first-order triangular Gmsh cells into a genuine Fluent mesh with inlet/outlet/walls. Then solver.settings.file.read_mesh(file_name=mesh[\"mesh_file\"]), solver.settings.mesh.check(), configure physics, initialize, iterate, and export_results. Save current case/data before replacing loaded geometry. Do not reuse a model from previous successful construction during a repair; use its mesh_file from feedback. For curved planar CAD, use fluentagi.geometry_mesh(directory=task_directory,code=gmsh_script_string); the worker has gmsh,math,output_dir already, no imports; create OCC geometry and physical line groups named inlet,outlet,walls, export STEP, generate first-order triangular or quadrilateral mesh(2). Returned mesh_file is Fluent format; gmsh-native.msh is NOT Fluent format. 3D modeling and volume mesh conversion are now implemented. fluentagi.build_volume(directory=task_directory, shape=\"box\",length=0.1,width=0.02,height=0.02,size=0.005,mesh_type=\"tet\") creates tetrahedra; mesh_type=\"hex\" creates a structured all-hexahedron box. shape=\"cylinder\",radius=0.01 supports tetrahedra with axis along +X. Inlet is X=0 and outlet X=length. fluentagi.build_extruded(directory=task_directory,points=[[x,y],...],inlet_edges=[0],outlet_edges=[2],depth=0.01,size=0.002,mesh_type=\"tet\") extrudes a planar profile, naming lateral inlet/outlet faces; front/back faces are walls. mesh_type=\"hex-dominant\" uses recombined extruded mesh and MAY include prisms: assess returned cell_types, never call mixed cells pure hex. geometry_mesh supports arbitrary OCC volumes (boolean unions/cuts), physical SURFACE groups inlet/outlet/walls, and mesh.generate(3), first-order tet/hex/prism/pyramid. Imported STEP is not currently supported by the restricted worker. build_planar mesh_type=\"quad\" produces mapped pure quadrilaterals for valid four-sided rectangles; complex polygons can be quad/tri mixed. 2D uses triangles/quads, 3D uses tet/hex. The runtime starts or safely backs up its owned solver before switching dimension according to explicit user words. Do not request user-supplied 3D mesh for supported geometry. Save backups before replacing any loaded mesh. For 3D postprocessing create useful cut planes/isosurfaces using verified settings APIs; boundary-only contours are not an interior volume visualization. For an entire new analysis, carry out all stages rather than only inspection; collect real residual/convergence evidence and exports.\nFor water-air transient filling, call fluentagi.configure_water_air(directory=task_directory,velocity=0.05,time_step=0.001,gravity_y=-9.81,inlet=\"inlet\",outlet=\"outlet\"). This backs up and sets laminar VOF, materials, phase-aware inlet/outlet, gravity and timestep; does NOT initialize or erase existing solution. For requested NEW filling use fluentagi.initialize_air(directory=task_directory), which saves a backup, hybrid initializes and patches phase-2 volume fraction to zero across all fluid cell zones. Never initialize_air on existing results without an explicit restart request. Fluent v242 contour fields are phase-2-vof (water, only after confirming phase-2=water-liquid) and phase-1-vof (air); do not confuse them. Query real contour field.allowed_values for VOF fields. For 3D interior contours/animation use section=fluentagi.create_section(axis=\"z\",position=depth/2), then export_results(...,surfaces=[section[\"surface\"]]) or record_animation(...,surfaces=[section[\"surface\"]]). A plane section is not full volumetric rendering; report it accurately. Frames are 2..60. Each frame after the first advances steps_per_frame real time steps; final time is initial time+(frames-1)*steps_per_frame*time_step. Do not claim the pipe fills if the simulated duration is too short. Normalize typos like \"二维四面体\" by explaining 2D triangular equivalent; if depth/3D was explicitly requested, use volume tools.\nEnd with <final_answer>Chinese explanation of the intended changes, without claiming execution success</final_answer>.\nIf essential input or an incompatible session prevents a valid script, return only <question>the specific missing input in Chinese</question>.\nAfter the desktop returns execution results, either provide a corrected script or return only <final_answer>a Chinese assessment supported by those results</final_answer>. Do not execute the same successful script again. Successful execution alone does not prove convergence.\n\nRuntime capabilities:\n{\"protocol\": \"FluentAGI-capabilities-v1\", \"session\": {\"connected\": true, \"mode\": \"launch\"}, \"geometry\": {\"worker\": \"gmsh isolated process\", \"imports\": [], \"builtins\": [\"range\", \"len\", \"int\", \"float\", \"str\", \"list\", \"tuple\", \"enumerate\", \"zip\", \"min\", \"max\", \"abs\", \"round\", \"RuntimeError\", \"ValueError\", \"print\", \"set\", \"sum\", \"sorted\", \"bool\", \"all\", \"any\"], \"physical_groups\": [\"inlet\", \"outlet\", \"walls\"], \"cell_types\": [\"triangle\", \"quadrilateral\", \"tetrahedron\", \"hexahedron\", \"prism\", \"pyramid\"]}, \"script\": {\"imports\": [\"math\", \"json\", \"itertools\", \"functools\", \"collections\", \"dataclasses\", \"typing\"], \"adapters\": [\"build_planar\", \"build_volume\", \"build_extruded\", \"geometry_mesh\", \"configure_water_air\", \"initialize_air\", \"record_animation\", \"export_results\", \"assign_phase_materials\", \"assign_multiphase_materials\", \"configure_three_phase_materials\", \"configure_evaporation_condensation\", \"inspect_phase_change\", \"configure_surface_tension\", \"inspect_surface_tension\"]}, \"generated_at\": 1792253089.358974, \"phase_change\": {\"version\": \"v242\", \"model\": \"VOF Lee\", \"phases\": [2, 3], \"saturation\": \"constant K\", \"frequencies\": \"positive finite 1/s\", \"mass_transfer_pairs\": 1, \"internal_official_tui\": true, \"generated_direct_tui\": false, \"readback\": \"unique case snapshot\", \"initializes\": false}, \"surface_tension\": {\"version\": \"v242\", \"model\": \"VOF\", \"coefficient\": \"nonnegative finite N/m\", \"preserves_other_pairs\": true, \"readback\": \"unique case snapshot\", \"initializes\": false}, \"fluent_version\": \"Ansys Fluent 2024 R2\", \"model_active\": false}\nCurrent session:\n{\"connected\": true, \"dimension\": 2, \"mode\": \"solver\", \"owned\": true}\nTask directory:\nC:\\Users\\13977\\AppData\\Local\\FluentAGI\\data\\runs\\20261018-000431-40ac88\nCurrent request:\n查找一些资料，帮我做一个流体二维经典案例，要求成几秒动画，比如扇叶搅动，局部加密\nDesktop execution feedback:\n[{\"action\": {\"tool\": \"run_code\", \"arguments\": {\"code\": \"# Use the existing connected PyFluent variable solver.\\ntask_directory = r\\\"C:\\\\Users\\\\13977\\\\AppData\\\\Local\\\\FluentAGI\\\\data\\\\runs\\\\20261018-000431-40ac88\\\"\\nprefix = task_directory + \\\"/cylinder_re100_a9e438cc\\\"\\nsettings = solver.settings\\n\\nif settings.setup.models.is_active():\\n    settings.file.write_case_data(file_name=prefix + \\\"_previous.cas.h5\\\")\\n\\ngmsh_code = \\\"\\\"\\\"\\ngmsh.model.add(\\\"cylinder_re100\\\")\\nocc = gmsh.model.occ\\nrectangle = occ.addRectangle(0, 0, 0, 2.2, 0.41)\\ndisk = occ.addDisk(0.2, 0.2, 0, 0.05, 0.05)\\nfluid, mapping = occ.cut([(2, rectangle)], [(2, disk)])\\nocc.synchronize()\\nsurfaces = [tag for dim, tag in fluid if dim == 2]\\nif len(surfaces) != 1:\\n    raise RuntimeError(\\\"Expected one connected fluid surface\\\")\\nboundary = gmsh.model.getBoundary(fluid, oriented=False)\\ngroups = {\\\"inlet\\\": [], \\\"outlet\\\": [], \\\"walls\\\": []}\\ncylinder = []\\nfor dim, tag in boundary:\\n    x, y, z = occ.getCenterOfMass(dim, tag)\\n    if abs(x) < 1e-7:\\n        groups[\\\"inlet\\\"].append(tag)\\n    elif abs(x - 2.2) < 1e-7:\\n        groups[\\\"outlet\\\"].append(tag)\\n    else:\\n        groups[\\\"walls\\\"].append(tag)\\n        if abs(x - 0.2) < 0.06 and abs(y - 0.2) < 0.06:\\n            cylinder.append(tag)\\nif not cylinder:\\n    raise RuntimeError(\\\"Cylinder boundary identification failed\\\")\\nfor name, tags in groups.items():\\n    if not tags:\\n        raise RuntimeError(\\\"Missing boundary: \\\" + name)\\n    group = gmsh.model.addPhysicalGroup(1, tags)\\n    gmsh.model.setPhysicalName(1, group, name)\\ngroup = gmsh.model.addPhysicalGroup(2, surfaces)\\ngmsh.model.setPhysicalName(2, group, \\\"fluid\\\")\\nfield = gmsh.model.mesh.field\\ndistance = field.add(\\\"Distance\\\")\\nfield.setNumbers(distance, \\\"CurvesList\\\", cylinder)\\nfield.setNumber(distance, \\\"Sampling\\\", 120)\\nnear = field.add(\\\"Threshold\\\")\\nfor key, value in [\\n    (\\\"InField\\\", distance), (\\\"SizeMin\\\", 0.004),\\n    (\\\"SizeMax\\\", 0.03), (\\\"DistMin\\\", 0.015), (\\\"DistMax\\\", 0.15)\\n]:\\n    field.setNumber(near, key, value)\\nwake = field.add(\\\"Box\\\")\\nfor key, value in [\\n    (\\\"VIn\\\", 0.012), (\\\"VOut\\\", 0.03),\\n    (\\\"XMin\\\", 0.2), (\\\"XMax\\\", 1.9),\\n    (\\\"YMin\\\", 0.09), (\\\"YMax\\\", 0.31),\\n    (\\\"ZMin\\\", -0.01), (\\\"ZMax\\\", 0.01), (\\\"Thickness\\\", 0.04)\\n]:\\n    field.setNumber(wake, key, value)\\nminimum = field.add(\\\"Min\\\")\\nfield.setNumbers(minimum, \\\"FieldsList\\\", [near, wake])\\nfield.setAsBackgroundMesh(minimum)\\nfor key, value in [\\n    (\\\"Mesh.MeshSizeExtendFromBoundary\\\", 0),\\n    (\\\"Mesh.MeshSizeFromPoints\\\", 0),\\n    (\\\"Mesh.MeshSizeFromCurvature\\\", 0),\\n    (\\\"Mesh.ElementOrder\\\", 1),\\n    (\\\"Mesh.Algorithm\\\", 6)\\n]:\\n    gmsh.option.setNumber(key, value)\\ngmsh.write(output_dir + \\\"/cylinder.step\\\")\\ngmsh.model.mesh.generate(2)\\ngmsh.model.mesh.optimize(\\\"Relocate2D\\\")\\ngmsh.write(output_dir + \\\"/gmsh-native.msh\\\")\\n\\\"\\\"\\\"\\nmesh = fluentagi.geometry_mesh(\\n    directory=task_directory,\\n    code=gmsh_code\\n)\\nprint(mesh)\\nif not isinstance(mesh, dict) or not mesh.get(\\\"mesh_file\\\"):\\n    raise RuntimeError(\\\"No verified Fluent mesh returned\\\")\\n\\nsettings.file.read_mesh(file_name=mesh[\\\"mesh_file\\\"])\\nsettings.mesh.check()\\nif not settings.setup.models.is_active():\\n    raise RuntimeError(\\\"Physics settings are inactive after reading mesh\\\")\\n\\nsetup = settings.setup\\nsetup.general.solver.type = \\\"pressure-based\\\"\\ntime_options = setup.general.solver.time.allowed_values()\\nif \\\"unsteady-2nd-order\\\" in time_options:\\n    setup.general.solver.time = \\\"unsteady-2nd-order\\\"\\nelif \\\"unsteady-1st-order\\\" in time_options:\\n    setup.general.solver.time = \\\"unsteady-1st-order\\\"\\nelse:\\n    print(time_options)\\n    raise RuntimeError(\\\"No supported transient solver option\\\")\\n\\nsetup.models.viscous.model = \\\"laminar\\\"\\nsetup.models.energy.enabled = False\\nsetup.general.operating_conditions.gravity.enable = False\\n\\nfluids = setup.materials.fluid\\nif \\\"air\\\" not in fluids.get_object_names():\\n    raise RuntimeError(\\\"Default air material is absent\\\")\\nmaterial = fluids[\\\"air\\\"]\\nmaterial.density.set_state({\\\"option\\\": \\\"constant\\\", \\\"value\\\": 1.0})\\nmaterial.viscosity.set_state({\\\"option\\\": \\\"constant\\\", \\\"value\\\": 0.001})\\n\\nzones = setup.cell_zone_conditions.fluid\\nzone_names = zones.get_object_names()\\nif not zone_names:\\n    raise RuntimeError(\\\"No fluid cell zone\\\")\\nfor name in zone_names:\\n    zones[name].material = \\\"air\\\"\\n\\nboundaries = setup.boundary_conditions\\nif \\\"inlet\\\" not in boundaries.velocity_inlet.get_object_names():\\n    raise RuntimeError(\\\"Expected velocity inlet named inlet\\\")\\nif \\\"outlet\\\" not in boundaries.pressure_outlet.get_object_names():\\n    raise RuntimeError(\\\"Expected pressure outlet named outlet\\\")\\n\\nmomentum = boundaries.velocity_inlet[\\\"inlet\\\"].momentum\\nmomentum_state = momentum.get_state()\\nif \\\"velocity\\\" in momentum_state:\\n    momentum.velocity = 1.0\\nelif \\\"velocity_magnitude\\\" in momentum_state:\\n    momentum.velocity_magnitude = 1.0\\nelse:\\n    print(momentum_state)\\n    raise RuntimeError(\\\"No verified inlet velocity setting\\\")\\nboundaries.pressure_outlet[\\\"outlet\\\"].momentum.gauge_pressure = 0.0\\n\\nprint({\\\"material\\\": material.get_state()})\\nprint({\\\"inlet\\\": boundaries.velocity_inlet[\\\"inlet\\\"].get_state()})\\nprint({\\\"outlet\\\": boundaries.pressure_outlet[\\\"outlet\\\"].get_state()})\\nprint({\\\"walls\\\": boundaries.wall.get_state()})\\nprint({\\\"Re\\\": 100.0, \\\"diameter\\\": 0.1, \\\"inlet_velocity\\\": 1.0})\\n\\ncalculation = settings.solution.run_calculation\\ncalculation.transient_controls.time_step_size = 0.005\\nprint({\\\"transient_controls\\\": calculation.transient_controls.get_state()})\\n\\nsettings.file.write_case(file_name=prefix + \\\"_setup.cas.h5\\\")\\nsettings.solution.initialization.hybrid_initialize()\\nsettings.file.write_case_data(file_name=prefix + \\\"_initial.cas.h5\\\")\\n\\nprint({\\\"residual_monitor_settings\\\": settings.solution.monitor.residual.get_state()})\\nprint({\\n    \\\"frames\\\": 41,\\n    \\\"steps_per_frame\\\": 30,\\n    \\\"time_step\\\": 0.005,\\n    \\\"physical_duration\\\": 6.0,\\n    \\\"maximum_iterations_per_step\\\": 20\\n})\\n\\ntry:\\n    animation = fluentagi.record_animation(\\n        directory=task_directory,\\n        field=\\\"velocity-magnitude\\\",\\n        frames=41,\\n        steps_per_frame=30,\\n        max_iter_per_step=20\\n    )\\n    print({\\\"animation\\\": animation})\\nfinally:\\n    settings.file.write_case_data(file_name=prefix + \\\"_checkpoint.cas.h5\\\")\\n\\nexports = fluentagi.export_results(\\n    directory=task_directory,\\n    fields=[\\\"pressure\\\", \\\"velocity-magnitude\\\"]\\n)\\nprint({\\\"exports\\\": exports})\\n\\nfor name, result in [(\\\"animation\\\", animation), (\\\"exports\\\", exports)]:\\n    if isinstance(result, dict):\\n        errors = result.get(\\\"errors\\\") or result.get(\\\"error\\\")\\n        failed = result.get(\\\"success\\\") is False or result.get(\\\"ok\\\") is False\\n        if errors or failed:\\n            print({\\\"failed_stage\\\": name, \\\"details\\\": result})\\n            raise RuntimeError(\\\"Inspect returned adapter errors: \\\" + name)\\n\\nprint({\\\"residual_monitor_final\\\": settings.solution.monitor.residual.get_state()})\\nprint(\\\"Review actual residual histories and time-step completion in solver output.\\\")\\nprint(\\\"Successful execution does not establish convergence or mesh independence.\\\")\"}}, \"result\": \"{\\\"status\\\": \\\"ok\\\", \\\"stdout\\\": \\\"{'files': ['C:\\\\\\\\\\\\\\\\Users\\\\\\\\\\\\\\\\13977\\\\\\\\\\\\\\\\AppData\\\\\\\\\\\\\\\\Local\\\\\\\\\\\\\\\\FluentAGI\\\\\\\\\\\\\\\\data\\\\\\\\\\\\\\\\runs\\\\\\\\\\\\\\\\20261018-000431-40ac88\\\\\\\\\\\\\\\\cad-564108ae\\\\\\\\\\\\\\\\cylinder.step', 'C:\\\\\\\\\\\\\\\\Users\\\\\\\\\\\\\\\\13977\\\\\\\\\\\\\\\\AppData\\\\\\\\\\\\\\\\Local\\\\\\\\\\\\\\\\FluentAGI\\\\\\\\\\\\\\\\data\\\\\\\\\\\\\\\\runs\\\\\\\\\\\\\\\\20261018-000431-40ac88\\\\\\\\\\\\\\\\cad-564108ae\\\\\\\\\\\\\\\\fluent.msh', 'C:\\\\\\\\\\\\\\\\Users\\\\\\\\\\\\\\\\13977\\\\\\\\\\\\\\\\AppData\\\\\\\\\\\\\\\\Local\\\\\\\\\\\\\\\\FluentAGI\\\\\\\\\\\\\\\\data\\\\\\\\\\\\\\\\runs\\\\\\\\\\\\\\\\20261018-000431-40ac88\\\\\\\\\\\\\\\\cad-564108ae\\\\\\\\\\\\\\\\gmsh-native.msh'], 'log': \\\\\\\"Info    : Writing 'C:\\\\\\\\\\\\\\\\Users\\\\\\\\\\\\\\\\13977\\\\\\\\\\\\\\\\AppData\\\\\\\\\\\\\\\\Local\\\\\\\\\\\\\\\\FluentAGI\\\\\\\\\\\\\\\\data\\\\\\\\\\\\\\\\runs\\\\\\\\\\\\\\\\20261018-000431-40ac88\\\\\\\\\\\\\\\\cad-564108ae\\\\\\\\\\\\\\\\cylinder.step'...\\\\\\\\n\\\\\\\\\\n…中间日志已省略，完整日志保存在任务目录…\\n 'weight': 2, 'color': 'foreground'}, 'marker': {'symbol': '', 'size': 0.3, 'color': 'foreground'}, 'marker_in_file': {'symbol': '+', 'size': 0.3, 'color': 'foreground'}}, {'line': {'pattern': '----', 'weight': 2, 'color': 'foreground'}, 'line_in_file': {'pattern': '', 'weight': 2, 'color': 'foreground'}, 'marker': {'symbol': '', 'size': 0.3, 'color': 'foreground'}, 'marker_in_file': {'symbol': '+', 'size': 0.3, 'color': 'foreground'}}, {'line': {'pattern': '----', 'weight': 2, 'color': 'foreground'}, 'line_in_file': {'pattern': '', 'weight': 2, 'color': 'foreground'}, 'marker': {'symbol': '', 'size': 0.3, 'color': 'foreground'}, 'marker_in_file': {'symbol': '+', 'size': 0.3, 'color': 'foreground'}}, {'line': {'pattern': '----', 'weight': 2, 'color': 'foreground'}, 'line_in_file': {'pattern': '', 'weight': 2, 'color': 'foreground'}, 'marker': {'symbol': '', 'size': 0.3, 'color': 'foreground'}, 'marker_in_file': {'symbol': '+', 'size': 0.3, 'color': 'foreground'}}, {'line': {'pattern': '----', 'weight': 2, 'color': 'foreground'}, 'line_in_file': {'pattern': '', 'weight': 2, 'color': 'foreground'}, 'marker': {'symbol': '', 'size': 0.3, 'color': 'foreground'}, 'marker_in_file': {'symbol': '+', 'size': 0.3, 'color': 'foreground'}}, {'line': {'pattern': '----', 'weight': 2, 'color': 'foreground'}, 'line_in_file': {'pattern': '', 'weight': 2, 'color': 'foreground'}, 'marker': {'symbol': '', 'size': 0.3, 'color': 'foreground'}, 'marker_in_file': {'symbol': '+', 'size': 0.3, 'color': 'foreground'}}, {'line': {'pattern': '----', 'weight': 2, 'color': 'foreground'}, 'line_in_file': {'pattern': '', 'weight': 2, 'color': 'foreground'}, 'marker': {'symbol': '', 'size': 0.3, 'color': 'foreground'}, 'marker_in_file': {'symbol': '+', 'size': 0.3, 'color': 'foreground'}}, {'line': {'pattern': '----', 'weight': 2, 'color': 'foreground'}, 'line_in_file': {'pattern': '', 'weight': 2, 'color': 'foreground'}, 'marker': {'symbol': '', 'size': 0.3, 'color': 'foreground'}, 'marker_in_file': {'symbol': '+', 'size': 0.3, 'color': 'foreground'}}, {'line': {'pattern': '----', 'weight': 2, 'color': 'foreground'}, 'line_in_file': {'pattern': '', 'weight': 2, 'color': 'foreground'}, 'marker': {'symbol': '', 'size': 0.3, 'color': 'foreground'}, 'marker_in_file': {'symbol': '+', 'size': 0.3, 'color': 'foreground'}}, {'line': {'pattern': '----', 'weight': 2, 'color': 'foreground'}, 'line_in_file': {'pattern': '', 'weight': 2, 'color': 'foreground'}, 'marker': {'symbol': '', 'size': 0.3, 'color': 'foreground'}, 'marker_in_file': {'symbol': '+', 'size': 0.3, 'color': 'foreground'}}, {'line': {'pattern': '----', 'weight': 2, 'color': 'foreground'}, 'line_in_file': {'pattern': '', 'weight': 2, 'color': 'foreground'}, 'marker': {'symbol': '', 'size': 0.3, 'color': 'foreground'}, 'marker_in_file': {'symbol': '+', 'size': 0.3, 'color': 'foreground'}}, {'line': {'pattern': '----', 'weight': 2, 'color': 'foreground'}, 'line_in_file': {'pattern': '', 'weight': 2, 'color': 'foreground'}, 'marker': {'symbol': '', 'size': 0.3, 'color': 'foreground'}, 'marker_in_file': {'symbol': '+', 'size': 0.3, 'color': 'foreground'}}]}}\\\\nReview actual residual histories and time-step completion in solver output.\\\\nSuccessful execution does not establish convergence or mesh independence.\\\\n\\\", \\\"stderr\\\": \\\"\\\", \\\"return_value\\\": null, \\\"message\\\": null, \\\"error_code\\\": null, \\\"warnings\\\": []}\"}]",
      "reply": "ChatGPT 说：\n\n<final_answer>桌面反馈显示脚本执行成功，无报错或警告；日志明确列出了 STEP 几何和 Fluent 网格文件，无需重复运行。\n\n但中间日志已省略，当前无法核实动画文件路径、实际帧数、最终物理时间及残差数值，因此尚不能确认动画完整生成、已算满 6 秒或流场收敛。需检查完整日志中的 animation、exports 返回结果和时间步残差，再判断涡脱落效果。</final_answer>",
      "executed_script": ""
    }
  ],
  "assessment": "桌面反馈显示脚本执行成功，无报错或警告；日志明确列出了 STEP 几何和 Fluent 网格文件，无需重复运行。\n\n但中间日志已省略，当前无法核实动画文件路径、实际帧数、最终物理时间及残差数值，因此尚不能确认动画完整生成、已算满 6 秒或流场收敛。需检查完整日志中的 animation、exports 返回结果和时间步残差，再判断涡脱落效果。",
  "note": "仅包含此任务由 FluentAGI 发送和读取的聊天，非整个网页历史；执行脚本成功不代表物理收敛。"
}